Sensors
Showing all 22 results
-
-
IMU, Sensors
Barometric Digital Pressure Sensor BMP280
QUICK OVERVIEW
Enhancement of GPS navigation
e.g.time-to-first-fix improvement，dead-reckoning，slope detection
Indoor navigation（floor detection，elevator detection）
Outdoor navigation，leisure and sports applications
Weather forecast
Healthcare application（e.g. sirometry）
Vertical velocity indication（e.g. risk/sink speed）
Target devices
Handsets such as mobile phones, tablet PCs, GPS devices
Navigation systemsSKU: n/a -
IR Sensors, Sensors
Correlation Photoelectric Infrared Count Sensor Module
QUICK OVERVIEW
With a signal output indication.
Single signal output.
The output valid signal is low.
The sensitivity is not adjustable.
Can be used for workpiece count, motor speed..
The circuit board output switch!SKU: 010259 -
IMU, Sensors
GY 521 – MPU-6050 Gyro Sensor + Accelerometer
QUICK OVERVIEW
Selectable Solder Jumpers on CLK, FSYNC, and AD0
Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
Tri-Axis accelerometer with a programmable full-scale range of ±2g, ±4g, ±8g, and ±16g
Digital Motion Processingâ„¢ (DMPâ„¢) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection
Embedded algorithms for run-time bias and compass calibration.SKU: MPU6050 -
IMU, Sensors
GY-291 ADXL345 3-AXIS ACCELEROMETER
QUICK OVERVIEW
Single tap/double tap detection
Activity/inactivity monitoring
Free-fall detection
10,000 g shock survival
SPI (3- and 4-wire) and I2C digital interfaces
Flexible interrupt modes mappable to either interrupt pin
Measurement ranges selectable via serial command
Bandwidth selectable via serial commandSKU: n/a -
IR Sensors, Sensors
GY-302 BH1750 DIGITAL LIGHT INTENSITY SENSOR MODULE
GY-302 Digital Light Intensity Sensor Module is a sensor module based on the BH1750 light sensor. BH1750 is a digital Ambient Light Sensor IC with an I2C bus interface. The module provides simple digital value via I2C so you don’t have to use any external components like AD converters.
SKU: n/a -
Current Sensor, Sensors
MAX471 GY-471 3A CURRENT SENSOR MODULE
The MAX471 module is a complete, bidirectional, high side current-sense amplifier for portable PCs, telephones, and other systems where battery/DC power-line monitoring is critical. High-side power-line monitoring is especially useful in battery-powered systems, since…
SKU: MAX471 -
-
Batteries & Accessories, Battery Level Indicators, Sensors, Voltage Sensor
RED LED DISPLAY DIGITAL VOLTAGE VOLTMETER PANEL DC 2.5-30 V
Batteries & Accessories, Battery Level Indicators, Sensors, Voltage SensorRED LED DISPLAY DIGITAL VOLTAGE VOLTMETER PANEL DC 2.5-30 V
QUICK OVERVIEW
Measure Voltage: DC 2.5-30V two-wire access.
Current Consumption : < 30mA
Accuracy : 0.1V.
Display on Voltage: 2.5 V.
Refresh Speed : Approx.200mS/time.
Weight: 10 gm.SKU: ZC21400 -
Sensors, Water Sensor
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer Module
Sensors, Water SensorSoil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer Module
This is a simple water sensor, can be used to detect soil moisture Module Output is high level when the soil moisture deficit,or output is low Can be used in module plant waterer device, and the plants in your garden no need people to manage
SKU: SOILSENSOR -
-
Sensors, Ultra Sonic Sensor
Ultra Sonic Sensor Module HC-SR04
QUICK OVERVIEW
Operating Voltage: 5V DC
Operating Current: 15mA
Measure Angle: 15°
Ranging Distance: 2cm – 400cm
Working Frequency: 40Hz
Trigger Input Signal: 10uS TTL pulse
Echo Output Signal: Input TTL level signal and the range in proportionSKU: HCSR04 -
Sensors, Vibration Sensor
Vibration Sensor Module – SW-420
QUICK OVERVIEW
Using SW-420 normally closed type vibration sensor
Comparator output, clean signal, good waveform, strong driving ability, >15mA
Operating voltage 3.3V ~ 5V
Output format: digital switching output (0 and 1)
Using a wide voltage LM393 comparator
With bolt holes for easy installationSKU: SW420 -
-
Sensors, Temperature Sensor
W1209 Temperature control switch with Temperature sensor and display
QUICK OVERVIEW
Temperature Control Range: Minus 50 to 110 C
Resolution at -9.9 to 99.9: 0.1 C
Resolution at all other temperatures: 1 C
Measurement Accuracy: 0.1 C
Control Accuracy: 0.1 C
Refresh Rate: 0.5 Seconds
Input Power (DC): 12V
Measuring Inputs: NTC (10K 0.5%)
Waterproof Sensor: 0.5M
Output: 1 Channel Relay Output, Capacity: 10ASKU: W1209
